What problems should be paid attention to when using CANopen absolute encoder
Release time:
2021-04-27 00:00
What problems should be paid attention to when using CANopen absolute encoder? CANopen absolute encoder is a device that converts changes in mechanical angle physical quantities into electrical signals. Encoders are mainly used to measure the angular displacement, angular velocity and angular acceleration of rotating objects. The high-precision encoder can convert these physical quantities into electrical signals and output them to the control system or instrument, and the control system or instrument controls the drive device according to these quantities.
1. Electrical aspects
Please do not wrap the power cord around the output line of the high-precision encoder, and do not place it near the switchboard to prevent interference. Shielded cables should be used for wiring. The transmission distance of the pulse signal is related to the following factors: frequency, output circuit, input circuit, transmission line and transmission frequency.
Before installation and start-up, carefully check whether the product specifications are consistent with the encoder model and whether the wiring is correct. Incorrect wiring will damage the internal circuit. For long-distance transmission, the signal attenuation coefficient should be considered, and the output mode with low output impedance and strong anti-interference ability should be selected.
2. Mechanical aspects
The connection between the CANopen absolute encoder and the user's output shaft should adopt a flexible soft connection to reduce the damage to the encoder shaft system and code disc caused by the series motion and beating of the user shaft. When installing the encoder, do not knock it. Please pay attention to the allowable shaft load during installation and do not exceed the load.
The different speeds of the encoder shaft and the user output shaft should be guaranteed
Nmax=(high response frequency/L)×60 r/min (L is the number of grating pulses). When using it for a long time, please check whether the parts and fixing screws connected to the high-precision encoder are loose, which will not affect the use of the equipment.
3. Environmental aspects
Because the high-precision encoder is a precision instrument, do not splash water, oil, etc. , And there is no source of interference. Pay attention to whether the ambient temperature and humidity are within the required range of the instrument.
When using high-precision encoders in different industries, the precautions are different, and the operator must pay special attention.
Other News
Introduce the difference between Canopen bus and Canopen absolute encoder
Controller area network is one of the most widely used open field buses in the world. As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN bus has been widely used in various automation control systems.
For example, the encoders inside printers and magnetic card machines have a simple structure, and many shells are not available. There is almost no need to talk about temperature, dustproof, waterproof, electromagnetic compatibility, and the price is extremely cheap.
What problems should be paid attention to when using CANopen absolute encoder
What problems should be paid attention to when using CANopen absolute encoder? CANopen absolute encoder is a device that converts changes in mechanical angle physical quantities into electrical signals.
How to use industrial Ethernet encoder to accurately measure speed
How to use industrial Ethernet encoder to accurately measure speed? In the use of encoders, angle or linear distance measurement is an important aspect, it can also be used for speed or linear velocity measurement. When the industrial Ethernet encoder rotates faster, the pulse frequency increases at the same rate.
Briefly describe the installation process of the servo encoder
Servo encoder is a kind of sensor installed on the servo motor, used to measure the magnetic pole position and the rotation angle and speed of the servo motor.
Understand where the servo encoder coupling should be changed in use
When choosing an encoder coupling, customers will consider its performance, service life, reliability, and whether there is noise. But there are still some unsatisfactory places in use, so where should the servo encoder coupling be changed in use?
It is a national high-tech enterprise specializing in R&D, production and sales of industrial rotary encoders.
Add：Building 1, North District, Zhongke Innovation Industrial Park, Economic Zone, Weihai City