Briefly describe the installation process of the servo encoder
Release time:
2021-04-24 00:00
Servo encoder is a kind of sensor installed on the servo motor, used to measure the magnetic pole position and the rotation angle and speed of the servo motor. According to the different physical media, servo encoders can be divided into photoelectric encoders and magnetoelectric encoders. The resolver is a servo encoder. Classification according to the engraving method of the code disc: (Now there are many classification methods for encoders, let's talk about the commonly used classification)
(1) Absolute encoder: There are several concentric code discs along the radial direction on the circular code disc. Each track is composed of transparent and opaque sectors. The sector tree of adjacent code discs is double. The number of code discs is the number of digits of its binary code. One side of the dial is the light source, and the other side has a photosensitive element corresponding to each code disc. When the dial is in different positions, each photosensitive element converts the corresponding level signal according to whether it is illuminated.
(2) Principle of incremental encoder: every time the shaft rotates around the specified unit angle, a pulse signal is sent out (a sine signal is also sent out, and then subdivided and chopped into higher pulses), usually A, b , C three-phase output, A, b two-phase pulse output delayed by 4 cycles, can be judged as positive or negative according to the delay relationship. By using the rising and falling edges of Phase A and Phase B, z can be doubled and quadrupled.
Classified according to the mechanical installation form of the encoder:
(1) Shafts Shafts can be divided into clamping flanges, synchronous flanges, and servo installations.
(2) The bushing type can be divided into half hollow type, full hollow type and large diameter type
Encoder application:
Weihai encoders are mainly used for CNC machine tools and mechanical parts, robots, automatic assembly machines, automatic production lines, elevators, textile machinery, sewing machinery, packaging machinery (fixed length), printing machinery (synchronous), woodworking machinery, plastic machinery (fixed number) , Rubber and plastic machinery, draftsman, goniometer, recuperation radar, etc.
Other News
Introduce the difference between Canopen bus and Canopen absolute encoder
Controller area network is one of the most widely used open field buses in the world. As a remote network communication control method with advanced technology, high reliability, complete functions and reasonable cost, CAN bus has been widely used in various automation control systems.
For example, the encoders inside printers and magnetic card machines have a simple structure, and many shells are not available. There is almost no need to talk about temperature, dustproof, waterproof, electromagnetic compatibility, and the price is extremely cheap.
What problems should be paid attention to when using CANopen absolute encoder
What problems should be paid attention to when using CANopen absolute encoder? CANopen absolute encoder is a device that converts changes in mechanical angle physical quantities into electrical signals.
How to use industrial Ethernet encoder to accurately measure speed
How to use industrial Ethernet encoder to accurately measure speed? In the use of encoders, angle or linear distance measurement is an important aspect, it can also be used for speed or linear velocity measurement. When the industrial Ethernet encoder rotates faster, the pulse frequency increases at the same rate.
Briefly describe the installation process of the servo encoder
Servo encoder is a kind of sensor installed on the servo motor, used to measure the magnetic pole position and the rotation angle and speed of the servo motor.
Understand where the servo encoder coupling should be changed in use
When choosing an encoder coupling, customers will consider its performance, service life, reliability, and whether there is noise. But there are still some unsatisfactory places in use, so where should the servo encoder coupling be changed in use?
It is a national high-tech enterprise specializing in R&D, production and sales of industrial rotary encoders.
Add：Building 1, North District, Zhongke Innovation Industrial Park, Economic Zone, Weihai City